Cold Cast Elastomers
Cold cast polyurethane elastomers and foams are used in a wide variety of applications from flexible polyurethane resin or foam to very hard plastics. These systems are formulated for application at room temperature and do not require heat for post-curation, making them simple and fast to produce. Both low- and high-pressure mixing equipment is suitable, and many products can be mixed by hand or machine. These elastomeric polyurethanes are typically used for concrete molds, architectural formliners, filtration units and more.
- Concrete Molds
- Concrete Repair
- Elastomeric Gaskets
- Rigid and Elastomeric Adhesives
- Flexible Molded Foam
- Rigid Pour Foam
- OEM Custom Molding Applications
- Rotocast Molds
- Architectural Form Liners
- Precaster Molds
- Stamp Pads
- Shoe Sole Inserts
- Vibration Dampening
- Sound Deadening
- Filtration
- Wheels and Rollers
Available Chemistries
- Isocyanates: MDI, TDI, HDI
- Resins: PTMEG, Polyester, Polyether
Processing – By Hand or Machine
- Open or closed mold casting
- Rapid de-mold times available
- Typically molds are not heated
- Heated post-curation not required
- Mercury-free formulations
Attainable Properties
- Hardness available from Shore OO to Shore D 85
- Cut and tear resistance
- Impact resistance
- Rapid development of green strength
- Flexural modulus
- Compression set
- Abrasion resistance
Environmentally Friendly
- 100% Solids, zero VOCs (Volatile Organic Compounds)